Instructions

57
7.2 AUTOMATIC PRINTOUT
When the Scanning function (printout every n minutes) is programmed, press
PRINT
to start the
measurements printing cycle with the SCAN time interval programmed.
This cycle starts by printing the measurement displayed when this command is sent.
The SCAN symbol remains lit on the display throughout the duration of operation of the automatic printout
mode. At each printout, the COM symbol lights up during data output.
If the programmed duration exceeds 10 minutes and Auto Off has not been cancelled, the instrument
will go to sleep automatically after the rst 10 minutes, then will wake up again at the time of the new
transmission, then will go to sleep again until woken again automatically.
To interrupt the programmed sequence, press
PRINT
a second time (the COM and SCAN symbols
disappear from the display).
During operation of the automatic printout function, press one of the buttons or turn the rotary switch to
interrupt the current print cycle (the and SCAN symbols disappear from the display).
8. PROGRAM MODE
8.1 ALARM / ∆T SESSION / CLOCK  / SCAN RATE
Pressing the
PRGM
button on Measurement mode allows you to activate the Program mode. The
PRGM symbol lights up on the display.
This command blocks all the functions which are in service including the digital output. The different
symbols of these functions disappear and the instrument does not make any more measurements. All
the buttons then give access to the second functions printed in yellow on the case. A second press on
PRGM
allows you to return to normal measurement mode and to validate the programming.
In program mode (PRGM displayed), ve values can be set by pressing different buttons:
Press button * Symbol on screen
Low alarm
1st press
ALARM
LO
AL
High alarm
2nd press
ALARM
HI
AL
Memorisation session
1st press

∆t
Current time
2nd press


Print rate
1st press
SCAN
SCAN
(*) The digital value which is displayed corresponds to the contents of the program memory for the chosen
function; If no value had been programmed before, three hyphens appear.