Instructions
56
7. PRINT MODE
7.1. MANUAL PRINTOUT
On measurement function or memorisation function, each press on
PRINT
transmits to the TxD
optical output a series of data in the following form:
<Time> <Filter> <Function> <Measurement> <Unit>
Each group is separated by 1 space.
The output of the ve groups is ended by a carriage return and 2 line paper advance.
Contents od each group:
<Time> Contains the time or the duration of ∆t displayed on the instrument when the command is
sent, in the form HH:MM.
<Filter> Contains the SMOOTH or PEAK function which is in service when the command is sent.
<Function> Contains the MEAS function information (current mesurement), AVG, MIN, MAX, HOLD.
<Measurement> Contains the digital measurement , 4 digits plus decimal point.
<Unit> Contains the measurement symbol displayed.
Example of printout:
___ 10:30 SMOOTH HOLD 12,3 V/m
___ 09:30 PEAK MIN 1999 µW/cm²
∆t 15:05 ___ AVG 12,57 A/m
During the duration of the transmission, the COM and PRINT symbols are lit on the display.
- the PRINT symbol indicates a demand for transmission.
- the COM symbol indicates the effective output of the data.
On the read memory function, press
PRINT
to send the contents of the memory to the digital output,
starting from the last memorisation and decreasing the addresses to the rst memorisation according
to the date.
The data is presented in the same form (see previous paragraph). The MR symbol species that it is a
printout of the measurement memory. The time corresponds to the date of each event describe. When
the memory is empty, the instrument transmits a line of three hyphens.
To interrupt the current printout of the measurement memory, simply press
PRINT
a second time.