Instructions

41
1. DESCRIPTION
1.1. CASE
1 Sound demodulation control
2 Optical connector, digital link
3 4 position rotary switch
4 PRGM button
- Programming
- Initialisation of the program memory
5 MEM button
- Memorisation of the measurement
- Display of the memory address
- Display of the remaining memory capacity
- Initialisation of the measurement memory
 button
- Programming the sessions of ∆t memorisation
- Setting the clock 
6 SMOOTH button
- Smoothing measurements
- Switching On/Off the display of the present time
 button
- Increase
7 MIN MAX button
- Recording MIN, MAX and AVG
- Display of MIN, MAX and AVG
- Switching On or Off the sound beep
 button
- Moving the programming digit to the left
8 Measurement probe connector
9 HOLD button
- Hold digital display
- Cancel auto Off
 button
- Move programming digit to the right
10 PEAK button
- Peak values, cancel 50Hz lter
 button
- Decrease
11 ALARM button
- On/Off alarm detection
- Selection of low and high alarms on programming
- Display of the alarms on re-reading measurement memory
12 PRINT button
- Printout
SCAN button
- Programming print rate.