Instructions

38
Thank you for puchasing an Wide band electric eld meter C.A 43.
For best results from your instrument:
 read these operating instructions carefully,
 comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.
WARNING, risk of electric shock. The voltage applied to parts marked with this symbol may
be hazardous.
Equipment protected by double insulation.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2002/96/EC.
SAFETY PRECAUTIONS
 Medical standards consider that electric elds greater than 60V/m can be dangerous to persons. The user
must therefore avoid remaining in close proximity to the instrument when in an environment of this kind.
 Before making a measurement, as soon as the instrument is switched on, check that the low battery
symbol (35) is not shown on the display. If it is, change the battery.
 In the case of prolonged storage, it is preferable to remove the battery from the instrument.
 When the probe is tted to the meter, avoid shaking the assembly, particularly in measurement mode.
 In order to keep the instrument in its accuracy class and to obtain optimum use, we advise against
leaving the C.A 43 permanently exposed to elds higher than 300 V/m or 100 A/m.