Data Sheet

TEST

SITE

Ω

H S

E-3P

Insulation

Loop

Earth 3p

RCD

Continuity

Earth Neutral Phase

100 %

0 %

62 %

COMPLEMENTARY FUNCTIONS AVAILABLE ON THE C.A 6133

Automatic test sequence

Save time! The AUTO-RCD automatic test sequence performs the

following operations:

- the No-Trip test, the Trip test at 1 x IΔn and the Trip test at 5 x IΔn,

- if necessary, the Trip test in ramp mode. A single press on the backup

buttons saves all the tests performed.

Another automatic test sequence is also available which performs the

following tests, successively:

LOOP – RCD – INSULATION

The data storage function can be used

to store your measurement results: up

to 99 tests per site on up to 30 sites!

The ANDROID IT-Report application can be used to

transfer the test results stored in the C.A 6133 onto a

tablet or smartphone via Bluetooth. Test reports are

then generated and sent automatically by email or

simply stored for processing later on.

Data storage

Bluetooth communication for Android IT-Report application

Current measurement

CHECK THE COMPLIANCE OF ELECTRICAL INSTALLATIONS WITH A SINGLE INSTRUMENT

3-pole cable for direct measu-

rements on 2P+E sockets.

PASS/FAIL LED for viewing the results

instantaneously.

The MN73A clamp is recognized auto-

matically when it is connected, as is the

measurement calibre.