Data Sheet
ERGONOMICS AND FUNCTIONS
Designed for checking safety on electrical installations, the C.A 6131 and C.A 6133 can be used to test a new installation before powering it up, check
an existing installation, whether in operation or not, and to troubleshoot a dysfunction.
For inspection organizations, these portable instruments are simple, effective and, above all, compliant with the applicable standards.
ELECTRICAL INSTALLATION TESTERS
Functions
Continuity
Compliant with the IEC 61557-4
standard. If the buzzer is active,
users are informed by a beep if
the measurement is below the
threshold, so they do not have
to look at the screen.
Earth
This function allows you to
measure an earthy resistance
using the stake method when
the electrical installation to be
tested is not powered up (new
installation, for example). It is
only available on the C.A 6133.
Loop
Loop measurement is perfor-
med in Trip or No Trip mode.
On a TN or TT installation, loop
impedance measurement can
be used to size the protective
systems for the installation
(fuses or RCDs), particularly in
terms of breaking capacity. On
a TT installation, this measure-
ment serves to determine the
value of the earth resistance
without setting up any stakes
and without having to power
down the installation.
Insulation
The user selects the test
voltage and chooses the set of
alarm thresholds. A visual indi-
cation instantaneously shows
whether the test is OK or not:
if the measurement is higher
than the threshold, the V LED
lights up. If the measurement is
lower than the threshold, the X
LED lights up.
RCD
The comprehensive RCD test
can be used with type A and
AC RCDs. 3 types of test are
available:
- No Trip test,
- Trip test in pulse mode,
- Trip test in ramp mode.
TEST
SITE
Ω
H S
E
R
E-3P
0
TEST
SITE
Ω
LPE
LOOP
L
Ik
U
L
0
A
50V
HOLD
TEST
SITE
A
Ω
Ω
0
<2Ω
COM
+
TEST
SITE
COM
+
M
Ω
MΩ
+
500V
V
TEST
SITE
LPE
L
U
L
50V
I
∆
n
mA
RCD
HOLD
V
AC x1
mA
Terminal strip.
A battery charger input.
3 voltage inputs including one for the
remote-control probe.
A specific 4-point socket for the
MN73A current clamp (option).
Direct access to the
measurements.
Backlit LCD
display.
Navigation keys.
TEST button.
LED showing voltage
present on PE.
Measurement validation LED.
Neck strap for hands-free use.
Built-in stand for benchtop use..
Charging via universal USB
connections!
Magnetized casing for magne-
tic mounting.
Data storage.
Activation of backlighting/
Bluetooth activation.
Rereading/deletion of
recorded measurements.
Buzzer activation/deactivation.
Cable compensation.