Instructions
28
producer consumer
source load
If the OL
Range 150A 10mV/A
Range 1400A 1mV/A
For example, a reading of 1V on the measuring instrument corresponds to a current of = 100A
2.4. AUTOMATIC STANDBY
DC Zero button or
ON
To reactivate the clamp, press the DC Zero button or set the switch to a position other than OFF.
To disable automatic standby, press the DC ZeroON
indicator blinks to report that the request has been applied, then lights steady yellow when you release
the DC Zero button.
2.5. MAINS ADAPTER (OPTION)
This makes it possible to connect the clamp, without risk, to measuring instruments having inputs that
The colour of the ON
1 V
10 mV/A










