User Manual

Technical characteristics

8.5. "Communication"

8.5.1. Communication port and peripherals

ETHERNET

100Base-T, electrically isolated (peripheral)

The 600V, CAT III isolation is implemented inside the instrument.

ETHERNET isolation by transformer

USB isolation by logical isolator

WIFI

WEP, WPA

USB

Electrically isolated

CDC (Communication Device Class) ACM (Abstract Control Model)

protocol to submit SCPI queries

MS (Mass Storage) protocol to manipulate the file system of SCOPIX IV (and

its SDCARD).

RNDIS (Remote Network Driver Interface Specification) to communicate via

USB using the TCP/IP protocol

SDCARD

Transfer of files between the scope and a PC type computer by memory card,

Micro SD format (type SC, HC, or XC).

The file system supported is FAT32.

8.5.2. Applications

SCOPENET

Accessible via ETHERNET, WIFI, or USB using a browser.

To access it, type the following line in the navigation bar of:

FIREFOX/CHROME/EXPLORER: http://<IP address>

 Example: http://192.168.1.1

This application uses IP ports 50 000 and 50 010 (it may be necessary to so

inform the Firewall installed on the PC).

Access to the file

system from a PC

via USB: using the RNDIS protocol (and the corresponding driver)

SCPI

via USB: using the CDC ACM protocol (and the corresponding driver)

via ETHERNET: on port 23

via WIFI: on port 23