User Manual

Applications
61
5.1.2. Using the touch screen
Icon  Action 
1. Connect the Probix probe to the input of the
channel.
2. Click the channel to refresh it ("channel
activated") and access parameterizing.
3. Press the type of coupling to select the desired
coupling.
4. Press + or - to select the desired sensitivity of the
channel or its maximum amplitude visible on screen.
5. Press the type of bandwidth to obtain the desired
limitation.
6. Press " ".
7. Click the time base to access the adjustments
8. Click " ".
9. Check that only "roll" is checked.
10. Select the duration of the time base with + or -.
11. Press " ".
12. The signal appears.
5.2 Autoset
The "Autoset" key projects on the screen the signal you want to display, along with its
characteristics (refer to "manual" display, §4.1.3.).
Thus, in one click, the signal appears optimally.

Example
1. Connect the Probix probe to the channel.
2. Press the key above.
3. A message appears on screen to indicate that the ScopiX is doing the necessary
parameterizing.
This optimizes the display of the signal.