User Manual

Functional Description

4.9 Update of the firmware of embedded programs

Firmware

Periodically, an "update available" message may appear on the home screen, if the

ScopiX is connected to Ethernet or WiFi:

This message means that update files have been downloaded transparently to the

ScopiX : they are available for an update, which is recommended in order to obtain new

functions, bug fixes; etc.



Select OK and the update automatically installs the files in the ScopiX.



The duration of the update varies, but is less than 15 minutes



Follow the directions (see below).



Do not switch off ScopiX during the update.



The files of the internal memory (measurements, screen shots, setups, etc.) are not

destroyed during the update.



For more complete information, go to the support space of our Web site: a manual

update procedure is available.

Update

installation

procedure

1. Connect the ScopiX , preferably to line power.

2. Check "Do you want to install it".

3. ScopiX switches off, then back on, automatically.

4. A screen (yellow-white) of which the colour varies to represent an action in progress,

with an "update running" message, remains on screen for approximately 8 minutes.

5. ScopiX switches itself off and back on.

6. A touch slab calibration procedure screen is displayed: follow the steps by checking

the 4 corners, then the centre.

7. The home screen is displayed again: you can view the new system information (date,

version, etc.)  the update is done.

 The operating instructions in .pdf format, or any other updated document, can be

downloaded and placed in the file manager in this way.