User Manual

Functional Description
24
Horizontal unit: This is indicated in place of the time base and is calculated from the
sweep coefficient:
Unit in (
Hz
div
)=
12.5
Sweep coefficient
Vertical unit: The sub-menus propose two possibilities:
a) Linear scale: by selecting the FFT menu, then linear scale
in (V/div)=
unit of the signal in its time-domain representation (V/div)
2
b) Log scale: by selecting the FFT menu, then log (logarithmic) scale
dB/div. = by assigning 0dB to a signal of 1 RMS amplitude division in the time
representation
The vertical position indicator of the representation is at –40dB.
3. XY
Assignment of the signals to the horizontal (X) axis and vertical (Y) axis.
Selection by "+/-".
Each axis is graduated in 8 divisions.
No, 2, 4, 16, 64
Vector, Envelope, Entire acquisition, persistence
Settings from 1ns to 200s
Increases the time resolution of a trace for a periodic signal