User Manual

Applications
68
6. HOW IS A QUANTITY MEASURED BY MULTIMETER?
6.1 Differentiating the channels
Channel 1 of the ScopiX is named CH1. It is used to
measure various physical quantities in addition to the signal
amplitude measurements, using the appropriate Probix
accessories. The other channels are voltmeter channels
only (or current channels, when used with a Probix clamp).
6.2 Type of measurement
Measurements CH1 CH2 CH3 CH4
Voltage




Current




Resistance

Capacitance

Diode test

Continuity

Power




Temperature by Pt100




By clicking  You can 

display the frequency, in the case of an AC amplitude measurement, as a
secondary measurement performed on each channel.

display the Min and Max values of the measurements made, as a secondary
measurement on each channel.

display the relative values of the measurements made, as a secondary
measurement on each channel.

save your configurations, by entering their properties.