User Manual

65
11. SCREEN SNAPSHOT MODE
The key can be used to take up to 12 screen snapshots and display the recorded snapshots.
Saved screens may then be transferred to a PC using the PAT2 application (Power Analyser Transfer).
11.1. SCREEN SNAPSHOTS
Press the key for approx. 3 seconds to shoot any screen .
When a screen snapshot is taken, the icon of the active mode ( , , , , , , ) in the top strip of the display
unit is replaced by the icon. You can then release the key .
The device can record only 12 screen snapshots. If you want to record a 13
rd
screen, the device informs you that snapshots must
be deleted by displaying the icon in place of .
11.2. HANDLING OF SCREEN SNAPSHOTS
To enter screen snapshot mode, briefly press the key. The device then displays a list of recorded screen snapshots.
Indicator of available image memory.
The black bar represents memory
used and the white bar represents
memory available.
List of saved snapshots. Each icon
represents the type of screen re-
corded. It is followed by the date and
time of the screen snapshot.
Display of the list of screen snap-
shots.
Deleting a screen snapshot.
Figure 108: The List of Screen Snapshots display screen
11.2.1. VIEWING A SNAPSHOT FROM THE LIST
To view a snapshot, select it in the list of screen snapshots using the , ,  and  keys. The date and time of the selected
snapshot are bolded.
Press

to display the selected snapshot. The icon is displayed in alternation with the icon for the mode that was active
when the snapshot was taken ( , , , , , , ).
Press to return to the list of screen snapshots.
11.2.2. DELETING A SNAPSHOT FROM THE LIST
To delete a snapshot, select it in the list of screen snapshots using the , ,  and  keys. The date and time of the selected
snapshot are bolded.
Press the key and validate by pressing

. The snapshot then disappears from the list.
To cancel the deletion, press rather than

.