User Manual

64
10.5. DISCONNECTION OF ENERGY METERING
To suspend energy metering, press .
The stop date and time of the meter-
ing are displayed alongside the start
date and time.
Figure 107: The Energy Metering screen in varh
A disconnection of the metering is not definitive. It can be resumed by pressing the key again.
Note: If no recording is in progress, then disconnecting the energy metering leads to the appearance of the blinking symbol
in the status bar (in place of the symbol). Disconnecting the energy metering also leads to the replacement of the
key by the key.
10.6. RESET OF ENERGY METERING
To suspend the metering, press the key. Then, to reset energy metering, press the key and validate with the

key. All
energy values (consumed and generated) are then reset.