User Manual
62
Notes: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the D label (dis-
tortion power) would have disappeared and the Q
1
label would have been replaced by the N label. This non-active power
has no inductive or capacitive effect.
Filters L2 and L3 display the same information for phases 2 and 3.
10.2.2. THE ENERGY METERS DISPLAY SCREEN
The Wh... sub-menu displays the energy meters.
Figure 102: The Energies Consumed and Generated display screen in L1
Notes: This screen corresponds to the choice «non-active quantities broken down» in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been «non-active quantities not broken down», then the Dh label
(distortion energy) would have disappeared and the Q
1
h label would have been replaced by the Nh label. This non-active
energy has no inductive or capacitive effect.
Filters L2 and L3 display the same information for phases 2 and 3.
10.3. FILTER Σ
10.3.1. THE TOTAL POWERS AND ASSOCIATED QUANTITIES DISPLAY SCREEN
The W... sub-menu displays the powers and associated quantities.
Total active power.
Total reactive power.
Total distortion power.
Active energy.
Reactive energy.
Distortion energy.
Apparent energy.
Meters of the energy generated by
the load.
Inductive reactive effect .
Capacitive reactive effect .
Total apparent power.
Total power factor.
Total fundamental power factor (also
called displacement factor - DPF).
Total tangent.
Figure 103: The Total Powers and Associated Quantities display screen in Σ
Note: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the D label (dis-
tortion power) would have disappeared and the Q
1
label would have been replaced by the N label. This non-active power
has no inductive or capacitive effect.
Meters of the energy consumed by
the load.