User Manual

61
Figure 99: The Energies Consumed display screen in 3L
Note: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods menu
of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the Dh label (distortion
energy) would have disappeared and the Q
1
h label would have been replaced by the Nh label. This non-active energy has
no inductive or capacitive effect.
10.1.4. THE ENERGIES GENERATED DISPLAY SCREEN
The sub-menu displays the meters of the energy generated by the load.
Figure 100: The Energies Generated display screen in 3L
Note: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods menu
of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the Dh label (distortion
energy) would have disappeared and the Q
1
h label would have been replaced by the Nh label. This non-active energy has
no inductive or capacitive effect.
10.2. FILTERS L1, L2 AND L3
10.2.1. THE POWERS AND ASSOCIATED QUANTITIES DISPLAY SCREEN
The W... sub-menu displays the powers and associated quantities.
10.1.3. THE ENERGIES CONSUMED DISPLAY SCREEN
The sub-menu displays the meters of energy consumed by the load.
Active energy.
Reactive energy.
Inductive reactive effect .
Capacitive reactive effect .
Active energy.
Reactive energy.
Inductive reactive effect .
Capacitive reactive effect .
Figure 101: The Powers and Associated Quantities display screen in L1
Active power.
Reactive power.
Distortion power.
Apparent power.
Power factor (PF).
Fundamental power factor (also
called displacement factor - DPF).
Tangent of the phase shift.
Phase shift of voltage with respect
to current.
Distortion energy.
Apparent energy.
Distortion energy.
Apparent energy.