User Manual

59
The following table indicates the time needed to display the curve on screen as a function of the width of the display window for
a recording period of one second:
Width of display window
(60 points or increments)
Grid increment
Typical waiting time for
display with the
MIN-AVG-MAX mode
deactivated
Typical waiting time for
display with the
MIN-AVG-MAX mode
activated
5 days 2 hours
11 seconds
10 minutes
2,5 days 1 hour
6 seconds
5 minutes
15 hours 15 minutes
2 seconds
1 minute 15 seconds
10 hours 10 minutes
2 seconds
50 seconds
5 hours 5 minutes
1 second
25 seconds
1 hour 1 minute
1 second
8 seconds
20 minutes 10 seconds
1 second
2 seconds
5 minutes 5 seconds
1 second
1 second
1 minute 1 second
1 second
1 second
Figure 96: Display Times table
These times can be long, so it has been made possible to stop the display at any time by pressing the key.
It is also possible, at any time:
 to press the or key to change the scale of the display,
 to press the  or  key to move the cursor,
 to press the  or  key to change the display filter.
But note that this may restart the loading and/or calculation of the values from the beginning.