User Manual

56
Figure 85: tan Φ (L1) without MIN-AVG-MAX for a three-phase connection with neutral
Figure 86: tan Φ (L1) with MIN-AVG-MAX
Figure 87: P (Σ) without MIN-AVG-MAX
Figure 88: P (Σ) with MIN-AVG-MAX
This curve differs slightly from the previous one because, with the MIN-AVG-MAX mode, there is no loss of information.
The MIN-AVG-MAX mode can be activated for the powers to display, above the curve, the mean power value at the cursor date
along with the maximum and minimum power values in the display period. Note that, in contrast with the other quantities, only
the bar chart of mean values is represented.
The sum of the powers of the three
phases (Σ) is presented in bargraph
form.
To change the scale of the display
between 1 minute and 5 days.
Note: For the quantities (P, VAR, S, D, PF, cos Φ and tan Φ) and for a three-phase source without neutral, only the total quantities
are represented.