User Manual

55
Figure 82: Arms (N) with MIN-AVG-MAX
The display period of this curve is one minute. Each point of the mean curve represents the arithmetic mean of 60 values recorded
every second. Each point of the curve of the maxima represents the maximum of the 60 values recorded every second. Each
point of the curve of the minima corresponds to the minimum of the 60 values recorded every second.
This display is therefore more precise than the previous one.
Curve of the maxima.
Curve of the mean.
Curve of the minima.
Values of the cursor (minimum,
mean, and maximum).
Figure 83: Vrms (L1) without MIN-AVG-MAX
For each of the phases (L1, L2, and L3), at each recording of a value over one second (recording period), the device also records
the minimum half-cycle RMS value over one second and the maximum half-cycle RMS value over one second. These are the
three curves shown in the figure above.
Figure 84: Vrms (L1) with MIN-AVG-MAX
This curve differs slightly from the previous one because, with the MIN-AVG-MAX mode, there is no loss of information.
Date of the cursor.
This screen is a partial view of the
trend curve. There are other screens
before and after the visible part.
Use the  or  key to move the
cursor.
Position of the viewing window in
the record.
To select the display filter, press the
 or  key.
The MIN-AVG-MAX mode has been
activated.