User Manual

30
Notes: The display in red of an alarm line means that the programmed quantity and/or target is incompatible with the configuration
chosen (connection selected, sensors connected, ratios programmed, calculation methods chosen).
The alarms on the level of harmonics of order 01 concern only the values expressed in % r.
If a search for alarms is in progress, the activated alarms cannot be modified and are identified by black spots. However,
new alarms (not yet programmed or not activated) can be activated.
To return to the Configuration menu, press .
4.11. ERASE MEMORY
The menu partially or totally deletes the data recorded in the device.
Figure 35: Erase memory menu
To select an item to be erased, move the yellow cursor to it using the ,, and  keys, then validate with the

key. The item
to be erased is identified by a red spot.
To select all items, press .
To unselect all items, press .
To proceed with the erasure, press the key , then confirm with the

key.
To return to the Configuration menu, press .
Note: Which erasures are possible depends on the recordings in progress (recording, metering of energy, search for transients
(for the C.A 8333 only) and alarms (for the C.A 8333 only)).
4.12. ABOUT
The About screen displays information concerning the device.
Figure 36: The About menu
To return to the Configuration menu, press .
For the C.A 8333 only