User Manual

106
17.5. MEMORY CARD
The device accepts SD (SDSC), SDHC, and SDXC type memory cards.
Before withdrawing or inserting the memory card, make sure that the device is disconnected and off. Write-protect the memory
card when you withdraw it from the device. Cancel the write protection before putting the card back into its space in the device.
To put the card back in place, slide it horizontally into its space until it is home and the tab is back in position.
Then replace the battery and the battery compartment cover as explained in §17.3.
17.6. METROLOGICAL CHECK
Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checking and calibration, contact one of our accredited metrology
laboratories (information and contact details available on request), at our Chauvin Arnoux subsidiary or the branch in your country.
Note: From the first check of the device, the Information sub-menu of the Configuration menu displays the date of adjustment
and the date of the next adjustment, as in the example below:
LOCK
LOCK
➀
➁
Memory card not protected
Memory card protected
To withdraw the memory card from its space, proceed as for the replacement of the battery, described in §17.3.
Once the battery has been withdrawn from its compartment, push the tab out of the way, then push the memory card out of the
device.
Figure 112: The About menu