User Manual

22
Range 3 V 30 V 300 V 1000 V
Measurement
range
3 mVdc to
2,999 Vdc
3.00 V to
29.99 V
30.0 V
to299.9 V
300 V to
1000 V
100 mVac to
2,999 Vac
Resolution 1 mV 10 mV 100 mV 1 V
Intrinsic
uncertainty
in Vdc
2% ± 3 pt
Intrinsic
uncertainty
in Vac
3% ± 4 pt
Input
resistance
10 MW
Automatic AC/DC detection is possible only above 450 ±
150mV.
3.3.2. RESISTANCE AND CONTINUITY
Particular reference conditions:
 Zero voltage.
 Pure resistance (no diode or capacitance in parallel).
Range 300 W 3 kW 30 kW 300 kW 3 MW 30 MW
Measure-
ment range
0.3 to
299.9
W
300 to
2999 W
3.00 to
29.99
kW
30.0 to
299.9
kW
300 to
2999
kW
3.000
to
30.00
MW
Resolution 0,1 W 1 W 10 W 100 W 1 kW 10 kW
Intrinsic
uncertainty
3% ±
5 pt
3% ± 3 pt
5% ±
3 pt
The 30 MW range is not available in automatic mode.
In continuity, in the 300 W, range, the instrument emits an
audible signal below 30 W.
3.3.3. DIODE
Particular reference conditions:
 Zero voltage.
 Diode without resistance or capacitance in parallel.
Diode voltage measured between 0.29 and 2V.
3.3.4. CAPACITANCE
Particular reference conditions:
 Zero voltage.
 Capacitance without resistance in parallel.
Range 3 nF * 30 nF * 300 nF 3 µF
Measurement
range
400 pF to
2.999 nF
3.00 to
29.99 nF
30.0 to
299.9 nF
0.300 to
2.999 µF
Resolution 0,001 nF 0,01 nF 0,1 nF 0,001 µF
Intrinsic uncer-
tainty
5% ± 10 pt 5% ± 5 pt
*: In these ranges, subtract the no-load value (typically 50pF)
from all readings.