User Manual

7
2. BATTERY CHARGE
Start by fully charging the battery before the first use.
In the 10 A range, the battery life is approximately 1h20. It is therefore best to charge the battery before starting series of
measurements. Charging must be done between 0 and 40°C.
The battery life of the instrument depends on the range. To display it (before making the measurement):
Current battery capacity in %.
Charging time: 3 h 30
Average battery life
according to range
Following long-term storage, the battery may be completely discharged. In this case, the first charge may last several hours. The
capacity of the battery and therefore the battery life of the instrument will be temporarily reduced. The battery will recover its
initial capacity after 5 recharging cycles.

DISPLAY
> 2s
SET-UP
400m W
1A
4000m W
100mA
40 W
10mA
400 W
10mA
40m W
1A
4000µ W
10A
OFF
Charge
OFF
Charge
OFF
Charge
Remaining battery life