User Manual

12
4. STORAGE OF RESULTS
Data storage is organised into objects (OBJ.), each of which can contain several tests (TEST). OBJ. corresponds to the object
tested and each test corresponds to a measurement made on the object. The instrument can store 100 measurements.
4.1 STORING
Once the measurement is
over, it can be recorded.
Press the MEM key.
The instrument proposes the first free location in
memory. If it is acceptable, execute a long press on
the MEM key.
To change the number of the test or of the object,
use the arrows.
If the location chosen is already occupied, the instrument so
indicates. But it is possible to overwrite the old measurement
with the new one.
To exit from the function without recording
anything, press the MEM key.
or
A
µ Ω
HOLD
+I

MEM
OBJ.
TEST
MEM
+I

MEM
> 2s
OBJ.
TEST
MEM
+I
OBJ.
TEST
OBJ.
MEM
+I
TEST
OBJ.
TEST
OBJ.
TEST
MEM
+I

MEM
> 2s

MEM
OBJ.
TEST
MEM
+I