User Manual

30
6.3.10. Displaying the Bluetooth measurements on the main screen
As described above, it is possible to assign a use to measurements.
If a measurement is "Displayed" or "Influence", it will appear in blue on the last line of the measurement zone of the screen
(unless the profile cursor is activated, because of lack of space). If the number of measurements is too large, they are not all
visible in continuous acquisition. However, if the image is frozen, all Bluetooth measurements corresponding to the acquisition
scroll along the line.
For each measurement, the measurement number is displayed as it appears in the Bluetooth measurements window, possibly
followed by an "i" if the measurement is used as an influence, followed by the separator ":", the name of the measurement, and its
value. Measurements are separated by 2 spaces.
If the setup of the Bluetooth peripheral is modified (change to another measurement function), then the use of all measurements
from this peripheral are forced to "hidden" on the camera and they disappear from the main screen. The operator must return to
the Main/Parameters/Bluetooth/Measurements menu to request display once again.
6.3.11. Can the Bluetooth measurements be saved at the same time as an image?
Yes, the Bluetooth measurements are recorded when an image is saved.
They can be viewed when the file is recalled (see § 4.6. Recalling an image
) by validating the item in the Recall menu.