User Manual

23
5. BACKUP AND RECALL OF USER CONFIGURATIONS
The setup files contain a complete backup of the current parameters of the camera, enabling the operator to return to an
operating mode defined earlier (user setup) or to a predefined setup (factory setup). The setup stores the list of Bluetooth
peripherals connected and their statuses, to allow their re-use.
5.1. Where are the configurations saved?
Like the images, the setup files are saved in the micro SD card. The files are stored in a single directory named
« /media/sdcard/config/ » placed in the root of the memory card.
Their names are entered by the operator at the time of the backup and have the extension ".CFG".
5.2. Saving the current setup of the camera
The backup is started by validation by F2 of the item
in the Main/Setup/User menu.
A new menu then opens for entry of the name of the file to be
created (up to 20 characters without extension).
The character to be inserted is selected using the arrow keys
and added using the F2 key.
The name entered is confirmed by the F1 key, while F3
cancels the entry and the request for backup of the setup.
5.3. Recalling a saved setup
A setup file is recalled from the Main/Setup/User/Files menu,
by means of the file manager, which lists all of the
configuration files (extension .CFG) found in directory
« /media/sdcard/config/ ».
When the file has been selected (Up/Down keys), a press on
F2 opens the file and updates all of the camera's
parameters with the values stored in the file.