User Manual

15
3. USE IN RECORDING MODE
The instrument can operate in two modes:
•
the stand-alone mode described in the previous section,
•
the record mode, in which it is controlled by a PC. This mode is described below.
3.1 CONNECTION
The device has 2 communication modes:
•
A USB link via a USB-micro USB cord,
•
A Bluetooth wireless link.
3.2 GET DATA LOGGER TRANSFER SOFTWARE
Visit our web site to download the latest version of the application software:
www.chauvin-arnoux.com
Go to the Support tab, then Download our software. Then search on the name of your instrument.
Download the software, then install it on your PC.
You must have administrator privileges on your PC to install the Data Logger Transfer software.
Minimum computer requirements:
•
Windows 7 (32/64 bits)
•
2 GB of RAM
•
200 MB of disc space
Windows
®
is a registered trade mark of Microsoft
®
.
Do not connect the instrument to the PC until you have installed the Data Logger Transfer software.
3.3 USB LINK
Long-press the key to switch the instrument on.
Once the Data Logger Transfer software has been installed, connect the instrument to the PC.
It is treated as a USB key and you can access its content. But to read the records, you must use the Data Logger Transfer
software.