User Manual

13
2.10 HOLD FUNCTION (HOLDING THE MEASUREMENT)
Pressing HOLD freezes the digital display on the last measurement displayed. Activating the function does not entail
interruption of recording or of the current mode, but access to the other functions of the device is disabled.
2.11 M_REC FUNCTION (MANUAL RECORDING)
You can start recording manually and all data measured are recorded in the device at the rate determined by the mode in
progress (see the table in § 4.3).
It is possible to record manually whatever mode is in progress (except P_REC). But once recording is in progress, it is no
longer possible to change modes.
2.12 BACK-LIGHTING FUNCTION
To activate and de-activate back-lighting.
The back-lighting switches itself off automatically after 10 seconds.
It is impossible to activate the back-lighting in the ECO mode.
To stop the
function
To stop
recording