User Manual

12
2.9 MIN MAX FUNCTION
This function displays the maximum and minimum measured values in addition to the current value: the device compares each
new measurement to those displayed. If the new measurement is greater than the former MAX value or less than the former
MIN value, it replaces them in the display.
The MIN MAX function cannot be used in the 1D and 3D modes.
When the MIN MAX function is activated, recording of the minimum and of the maximum starts but the display of the three
quantities measured makes it possible to continue using the device normally.
To stop the MIN MAX function.
Entering the MIN
MAX function
Display of MIN
MAX CO
2
Display of MIN MAX in
temperature
Display of MIN MAX in
humidity