User Manual
14
Before starting a recording session, make sure that the battery life is sufcient, or else connect the instrument to an external
power supply to a wall outlet using a micro USB cord.
4.5.5. DISPLAY
By clicking on , then opening the Thermo-hygrometer tab, you can modify the display of the measurements on the instrument
in the same way as you can by pressing the or °C/°F keys.
4.5.6. ALARM
By clicking on , then opening the Alarms tab, you can program an alarm on each of the measurement channels (temperature
and humidity). It may be triggered if the measurement is:
above a high threshold,
below a low threshold,
between 2 thresholds,
above the high threshold or below the low threshold.
4.5.7. RECORDING ON ALARM CONDITION
You can program recording to be triggered only when an alarm threshold is crossed ( ). The instrument then records the meas-
urements for the programmed duration.
To ensure that no crossing of an alarm threshold is missed, the instrument cannot be switched off when this is done.
4.5.8. READING THE RECORDS
The Data Logger Transfer software lets you read the records made. Click Recorded Sessions under the name of your instrument
to obtain a list of the records.
4.5.9. EXPORTING RECORDS
Once the list of the records is displayed, choose the one you want to export and convert it into a word-processing document (docx)
or a spreadsheet (xlsx), in order to be able to use it in the form of reports or curves.
It is also possible to export the data to the DataView application software (see §1.2).