User manual

Operating Instructions
ST-200X User Manual 12
Revision: 2004-11-02/11:00
CA-8 & CA-8F Easy Controller (Optional)
The CA-8 Easy Controller is used only in master/slave mode. Connect the controller to the 1/4”
microphone plug in the first unit. The table below describes the different preset shows the CA-8
Controller can command.
CA-8 BUTTONS
Stand By Mode Button Function button
Audio
(LED off)
Press function and all units will
strobe quickly.
(Audio triggered)
Manual
(LED on)
Steps to the next preset pattern.
(Audio triggered)
Blackout
Auto
(LED blinks)
Tap to select from 12 patterns
with preset speeds.
Hold for 3 seconds to select 1 of
3 brightness levels.
Note! You must reselect the desired pattern
after setting a brightness level. Pressing the
Function key in this mode will automatically
step to the next pattern regardless of how
long you hold the key.
Figure 3 - C
A
-8 Easy Controller &
the CA-8F Foot Controller