User manual

DMX Channel Values
Channel Value Function
0-19 Stop
20-59 Rotate Down (fast to slow)
60-119 Stutter Down (fast to slow)
120-139 Stop
140-199 Stutter Up (slow to fast)
200-249 Rotate Up (slow to fast)
1
250-255 Music Trigger
0-19 Turn Off
20-59 No Function
60-99 Turn On
2
100-255 Strobe (slow to fast)
Maintenance
To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage and
environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at
least twice a month. Dust build up reduces light output and can cause overheating. This can lead to reduced
lamp life and increased mechanical wear. Be sure to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents and internal components. Clean all glass when the fixture is cold with a mild solution of glass
cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue. Apply solution to the cloth or tissue
and drag dirt and grime to the outside of the lens. Gently polish optical surfaces until they are free of haze and
lint. Do not to touch the lamp glass when cleaning fixture. Oil and dirt can cause damage and premature aging
of the lamp. In the event that the lamp is touched or becomes dirty, clean the lamps with an alcohol wipe.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. Clean with soft cloth
using normal glass cleaning fluid. Always dry the parts carefully. Clean the external optics at least every 20
days. Clean the internal optics at least every 30-60 days.
Stepper User Manual 12 2006-12-12/09:53