User manual
Hanging Clamp
Note!
Clamp is sold separatel
y
.
Mounting
ORIENTATION
ovided there is adequate room for ventilation.
RIGGING
e fan or vents pathwa nt the
table “C type clamp. Adjust the angle of the
sening both k bs and tilting the fixture. After finding the
obs.
• When selecting installation location, take into consideration lamp
nce.
• exposed to rain, high
5. OPE CTIONS
Operation
Stand-Alone to Mode):
This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto
Mo
1) tche or Auto Mode.
Mode Dipswitches
Sound-Active 10 = Off, 11 = Off, 12 = Off
Auto Mode 10 = Off, 11 = Off, 12 = On
2) The unit will react to the low frequencies of music via the internal microphone in Sound Active
change in Auto Mode.
3) Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
reases the sensitivity
This fixture may be mounted in any position pr
It is important never to obstruct th y. Mou
fixture using, a sui ” or “O”
fixture by loo no
desired position, retighten both kn
replacement access and routine maintena
• Safety cables must always be used.
Never mount in places where the fixture will be
humidity, extreme temperature changes or restricted ventilation.
RATING INSTRU
Mode (Sound-Active, Au
de.
Set dipswi s position to Sound Active
mode, or the unit will auto
Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the
knob clockwise inc
Scorpion Sky User Manual 11 2008-02-05/15:26