User manual

Page 18 of 28 Scorpion™ GBC EU/RBM EU/RGY EU/BLU EU User Manual (Rev. 4)
Sound Mode
(BLU EU)
To enable the Sound mode, do the following:
1) Press <MENU> repeatedly until the active option of the Auto/Sound branch (AFM to
rdM) appears on the display.
2) Use <UP> or <DOWN> to select the sound triggered program (SoM).
3) Press <ENT> (SoM will show solid on the display).
4) Turn the music on.
5) Press <MENU> repeatedly until the active option of the Sound Sensitivity branch (S
0 to S 9) shows blinking on the display.
6) Use <UP> or <DOWN> to select the sensitivity level (S 0~S 9).
7) Press <ENT> (the new sound sensitivity will show solid on the display).
The fixture will only respond to the low frequencies of the
music (bass and
drums).
Automatic Mode
(GBC EU, RBM
EU, and RGY EU)
To enable the Automatic mode, follow the instructions below:
1) Press <MENU> repeatedly until the active option of the Auto/Sound branch (AF1 to
rdM) shows blinking on the display.
2) Use <UP> or <DOWN> to select an automatic program (AF1~ASM).
3) Press <ENT> (the new auto program will show solid on the display).
Automatic Mode
(BLU EU)
To enable the Automatic mode, follow the instructions below:
1) Press <MENU> repeatedly until the active option of the Auto/Sound branch (AFM to
rdM) shows blinking on the display.
2) Use <UP> or <DOWN> to select the automatic program (AFM or ASM).
3) Press <ENT> (the new auto program will show solid on the display).
Laser Sky Mode
(GBC EU, RBM
EU, and RGY EU)
To enable the Laser Sky Color mode, follow the instructions below:
1) Press <MENU> repeatedly until the active option of the Laser Sky Mode branch (LS1
to LSS) shows blinking on the display.
2) Use <UP> or <DOWN> to select a laser sky color option (LS1~LSS).
3) Press <ENT> (the new laser sky color will show solid on the display).
Laser Sky Mode
(BLU EU)
To enable the Laser Sky Color mode, follow the instructions below:
1) Press <MENU> repeatedly until the active option of the Laser Sky Mode branch
(LSE or LSS) shows blinking on the display.
2) Use <UP> or <DOWN> to select a laser sky color option (LSE or LSS).
3) Press <ENT> (the new laser sky color will show solid on the display).
Laser Sky Angle
(all models)
To enable the Laser Sky Effect mode, follow the instructions below:
1) Press <MENU> repeatedly until LSU shows blinking on the display.
2) Use <UP> or <DOWN> to change the angle of the laser sky effect.
3) Press <ENT> (LSU will show solid on the display).
Continues on the next page