User manual

Scorpion™ Dual User Manual Rev. 1 Page 17 of 64
DMX Channel Modes, Assignments, and Values
10-Channel
Channel Function Value Setting
1 Control Functions
000 ó 085
086 ó 170
171 ó 255
DMX mode (other channels activated)
Auto program
Sound-Active
2 Strobe
000 ó 009
010 ó 249
250 ó 255
No function
Slow to fast
On
3
Pattern Selection
000 ó 255
Patterns as shown in Patterns table.
4 Zoom
000 ó 127
128 ó 169
170 ó 209
210
ó
255
100%–5%
Zoom in
Zoom out
Zoom in and out
5 Y-Axis Rolling
000 ó 127
128 ó 191
192
ó
255
Fixed position on y-axis (0 to 359°)
Clockwise rolling, slow to fast
Counter-clockwise rolling, slow to fast
6 X-Axis Rolling
000 ó 127
128 ó 191
192
ó
255
Fixed position on x-axis (0 to 359°)
Clockwise rolling, slow to fast
Counter-clockwise rolling, slow to fast
7 Z-Axis Rolling
000 ó 127
128 ó 191
192
ó
255
Fixed position on z-axis (0 to 359°)
Clockwise rolling, slow to fast
Counter-clockwise rolling, slow to fast
8 Pan
000 ó 127
128 ó 191
192
ó
255
Fixed position (128 horizontal points)
Clockwise movement, slow to fast
Counter-clockwise movement, slow to fast
9 Tilt
000 ó 127
128 ó 191
192
ó
255
Fixed position (128 vertical points)
Clockwise movement, slow to fast
Counter-clockwise movement, slow to fast
10 Scan Speed
000 ó 127
128 ó 169
170 ó 209
210 ó 255
Fast to slow (manual)
Slow to fast (automatic)
Fast to slow (automatic)
Fast to slow, then slow to fast (automatic repeat)
•
For manual operation of lasers using DMX control, be sure Channel 1 is set to
DMX mode (000—085).
• For automatic operation of lasers using D
MX control, be sure Channel 1 is set to
Auto program (086–170).
• Channel 2 must be set to 010–255 for Channel 1 to be operational.