User manual

Operation
18- MVP™ Ta8 Curve User Manual, Rev. 1
8. Operation
Additional
Hardware and
Software
In addition to the panels, you will need other hardware and software to design, build, and
operate your VIP™ video wall system. The following table summarizes these additional
items—some are required and others are optional.
Item
Description
Item Code
Item Number
VIP™ Driver
Interface between the signal source, LED
Studio, and the MVP™ Ta8 Curve being used
99090575 VIPDRIVER
LED Studio
Software application used to design and run
the MVPs comprising the video wall. A PC is
needed
VIP™ Signal Distributor
(optional up to 24 panels)
Connects between the VIP™ Driver and the
MVPs to distribute the source signal from the
VIP™ Driver to the video wall when using
more than 24 panels
99090576 VIPSIGDISTRO
MVP™Ta RKL/RKR
Rigging Kit
(optional)
Left side rigging kit
12090647 MVP-RKL
Right side rigging kit
12090646 MVP-RKR
Neutrik® etherCON®
Signal Extension
(optional)
etherCON® Signal Extension, 18 in
etherCON® Signal Extension, 5 ft
etherCON® Signal Extension, 10 ft
19090363
19090364
19090365
MVPU-SIG18IN
MVPU-SIG5FT
MVPU-SIG10FT
Neutrik® powerCON®
Extension
(optional)
powerCON® Extension, 18 in
powerCON® Extension, 5 ft
powerCON® Extension, 10 ft
powerCON® Extension, 25 ft
powerCON® Extension, 50 ft
powerCON® Bare Wire Lead, 50 ft
19110372
19110373
19110374
19110375
19110376
19110377
PCEXT18IN
PCEXT5FT
PCEXT10FT
PCEXT25FT
PCEXT50FT
PCLEAD50FT
MVP™ Ta8 Curve 2-pack
and 6-pack
MVP™ Ta8 Curve Ta8 2-Pack
MVP™ Ta8 Curve Ta8 6-Pack
12090645
12090644
MVPTA8CURVEX2
MVPTA8CURVEX6
VIP™ Media System and
one VIP™ Driver
Rack mountable, video computer system with
the VIP™ Driver and LED Studio software
MVPU-MS
VIP™ Media System with
ArKaos Media Master
Express + KN and One
VIP™ Driver
Rack mountable, video computer system with
the VIP™ Driver and LED Studio software, as
well as ArKaos Media Master Express
MVPU-MSMME
ArKaos Media Master
Express + KN
Video playback software + KN control
MVPU-MSPRO