User manual

Customizing
-20- LED Studio User Manual Rev. 2
3. Modify the Width setting to 1280 by clicking the <Set Width> check box
4. Set the <Display mode> drop down menu to 1280 x 1024 or higher
Depending on the video input aspect ratio, the Y Start value
may need to be
adjusted to compensate.
Scaling
To run video from a DVD video player directly into the MVP™ Driver without using any
special software or scaling equipment, scale the video input directly from the MVP™
Driver with LED studio. T
he video input resolution and the total width/height of the video
wall are required numbers for scaling.
In this example, the video input resolution is
1024 x 768, and the video wall is 480
x 288. Scaling only works with a single Standard Block Layout.
1. Set the <Display mode> drop down menu to 1024 x 768
2. Determine the scaling ratios:
Quantity of LEDs
= Scaling Ratio
Video Resolution
3. Input 0.468 into the width scaling text field (e.g., 480/1024=0.468)
4. Input 0.375 into the height scaling text field (e.g., 288/768=0.375)
5. Select the <Port of hot backup> check box(s)
6. Press <Save on sender>
Width Scaling
Height Scaling
Port of hot backup
Width setting
Y Start
Display mode