User manual

Addressing
-16- LED Studio User Manual Rev. 2
8. Once the size of the empty has been set, the panel output must be turned off. Do
this by setting it to “empty” in the <Main cable> drop-down menu
Standard Block Layout
(Multiple Display)
This setup encompasses multiple displays, each of which may be either standard block
layouts or column/row layouts.
1. Create a Standard Block or Column/Row with Empty Space layouts
2. Navigate to Options > Hardware Setting > Display connection
3. Change the quantity of displays to “2”
4. Press <Update display> button
5. Select the second display, and address it (see Standard Block or Column/Row)
6. Send the addressing to the video wall by pressing
<Send to receiver>
The d
isplay quantity is limited by the speed and memory of the graphics card of
the computer.
All of the displays will overlap at the top, left corner of the screen!
Refer to the
Screen Area section to control the position of the displays.
Set to “empty”
Set to “2”
Then, press
“Update
display”