User manual

Addressing
LED Studio User Manual Rev. 2 -15-
5. Set each of the panels with the appropriate fields, excluding the empty spaces. An
example of columns with empty space
6. Set the width and height of the empty spaces. Keep in mind that the panel width
and height refers to the physical size of the space between the panels around it
7. The size of the empty panels must be set, depending on the space needed. Use the
physical space between MVP™ panels to set the width and height. For example, if
you are using the MVP™ 18 (32x32 LEDs), and you have 2 ft between the columns
(physical width of a single panel) you should set your empty width to “32”
In this example, the height should remain the same, regardless of how much
space there is between the panels.
Set space between
panels to “empty”.
In this example,
there are empty
columns