User manual

Appendix
LEG-3000 Manual 15 Revision: 2006-01-20/16:03
Service Functions
{    } - Fixture Reset (all motors)
This function will re-initialize the fixture by returning all motors to its startup positions or otherwise
known as (home position).
FUNCTION SET TO NOTES
Off Normal


On Reset all motors
{    } - Fixture Reset (excludes Pan & Tilt)
This function will re-initialize the fixture with exception of the Pan and Tilt motors.
FUNCTION SET TO NOTES
Off Normal


On Reset unit
{    } – Lamp Time
The (lamp time) readout displays the number of hours the lamp has been in use. It is not uncommon
to find new fixtures with a few logged hours. This means the fixture was thoroughly tested prior to
delivery.
1. Press the [◄ MENU] button until the display reads “”.
2. Press [▼SELECT] button to read the number of hours used.
3. Press both [▼▲ SELECT] buttons at the same time to reset the lamp counter to zero if changing
a lamp.
{    } – Fixture Timer
The (Fixture Timer) readout displays the total number of operating hours of the fixture. It is not
uncommon to find new fixtures with a few logged hours.