User manual

Appendix
LEG-3000 Manual 14 Revision: 2006-01-20/16:03
{    } – Pan/Tilt control channel re-assign
This function will re-position the pan & tilt control channels to start at DMX value number 1.
FUNCTION SET TO NOTES
Off Default


On
Pan/Tilt re-assign to channel
1-4
{    } - Shutter auto-close
The shutter will close momentarily during the color, gobo or prism changes. The shutter will re-open
once the color, gobo or prism has reached its position.
FUNCTION SET TO NOTES
Off Normal


On Shutter auto-close
{    } - Color wheel linear/step behavior
This function set to “Off” will allow the linear or gradual progression for the selection of a color on the
color wheel. It gives the user the ability to stop the wheel in between colors. The default “On” setting
advances the color wheel full or complete steps.
FUNCTION SET TO NOTES
Off Linear progression


On Step advance
{    } – Manual focus
The user can use this function to manually adjust the focus. This feature can be used in conjunction
with operating the demo show or during maintenance and alignment.
FUNCTION SET TO NOTES
Off Normal


On Adjust focus
Segment Display Configurations
{    } - Display Auto-off
The led display can be set to automatically turn off during normal operations.
FUNCTION SET TO NOTES
Off
Display Auto-Off, press any
key to turn on display


On Always on
{    } - Reverse the display
You can rotate the display 180° so that it becomes easier to read when the fixture is positioned
upside down.
FUNCTION SET TO NOTES
Off Normal display view


On Reverse the display