User manual

LEG-3000 Manual 11 Revision: 2006-01-20/16:03
[MENU] Toggles menu
functions.
[SELECT] Changes menu
function status and is used to
set DMX address.
OPERATING INSTRUCTIONS
Control Board
On the control panel you can set the DMX
address, reset the fixture and change fixture
personality trait.
Control Board Functions
FUNCTION OPTIONS NOTES


000~512 DMX channel addressing



Lamp use timer
Pressing ▲▼ simultaneously zeroes lamp counter.


Off/On
Off: Normal
On: Shutter closes during the changing of color, gobos
or prism. Shutter will open after color, gobo or
prism is in position.


Off/On
Off: Color wheel gradually advances to the next color
allowing the user to stop between colors.
On: Color wheel will jump to the next color.


Off/On
Off: Normal
On: Focus adjustment


Off/On
Off: Left to right head movement (Pan Normal)
On: Right to left head movement (Pan Inverted)


Off/On
Off: Down to up head movement (Tilt Normal)
On: Up to Down head movement (Tilt Inverted)


Off/On
Off: 8 bit control mode
On: 16 bit control mode


Off/On
Off: Normal
On: Self-demo


Off/On
Off: Quick paced function demonstration
On: Slow paced function demonstration
Note: Only works with  = On


Off/on
Off: Display off, press any key to turn on display
On: Display On


Off/On
Off: Normal
On: Reset all motors at once


Off/On
Off: Normal
On: Reset entire unit, defaults to Off


Off/On Off: Lamp Off On: Lamp On


Off/On Off: Normal On: Reverse LED display


Off/On
Off: Assign Pan & Tilt’s DMX address to channel 8-1
On: Assign Pan & Tilt’s DMX address to channel 1-4



Fixture use timer. Press ▼▲ simultaneously for 3 seconds
to zero the timer. Unit: hour


Off/On

Off: Normal, please be sure to disconnect DMX console
On: Sound-activated (Slow),see full instructions pg.16


Off/On
Off: Normal, please be sure to disconnect DMX console
On: Sound-activated (Fast) ,see full instructions pg.16