User manual

Operation
Stand-Alone Mode (Auto Mode):
This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto
Mode.
1) Press <MOD
E/ESC> until
, or is displayed.
2) Use the <UP> an
d <DOWN> buttons to scroll through until the is displayed and
press the <ENTER> button.
will be displayed.
3) The unit will auto rotate in Auto Mode.
Master/Slave Mode (Master Auto):
This mode will allow you to link up to 32 units together without a controller.
1) Use standard DMX cables to daisy chain your units together via the DMX connecto
r on the rear
of the units. For longer cable runs we suggest a terminator at the last fixture. For more
information about terminators, see page 8.
2) Choose a unit to function as the master. Press <MOD
E/ESC> until
or
is displayed on the master unit.
3) Use the <UP> an
d <DOWN> buttons to scroll through until
is displayed and
press the <ENTER> button.
will be displayed.
4) Press <MOD
E/ESC> until
or is displayed on the slave units. Use
the <UP> and <DOWN> buttons to scroll through until
is displayed and press the
<ENTER> button.
will be displayed
Multi Mover User Manual 13 2007-01-03/16:45