User manual

Menu Functions
MENU OPTION DESCRIPTION
Stand Alone – Automatic: The bu
ilt in programs will trigger automatically to a pre-
programmed speed time.
Slave Unit: Sets the fixture to run
in sync with the Master. You must set the first
fixture in the data link to “Master” otherwise nothing will happen.
DMX: The fixture will be controlled by a DMX signal coming from a DMX controller.
The starting addr
ess must be selected, and can be set using the up and down
buttons.
User Configurations
TO SET THE PAN TO INVERTING OR NON-INVERTING:
1) Press <MODE/ESC> until is displayed. Use the <UP> and <DOWN> buttons to
scroll through the two options.
is non-inverting; is inverting.
TO REVERSE THE DISPLAY:
1) Press <MODE/ESC> until or is displayed.
2) Use the <UP> an
d <DOWN> buttons to scroll through the two options. is normal;
is reversed.
Service Functions
TO TURN THE PLATFORM POWER ON OR OFF:
1) Press the <MODE/ESC> button until or is displayed.
2) Use the <UP> an
d <DOWN> buttons to select the desired option and then press the <ENTER>
button.
turns the platform power on; turns the platform power off.
TO RESET THE FIXTURE:
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now reset itself.
TO RESTORE ALL SETTINGS TO THEIR FACTORY DEFAULTS:
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now load all factory default settings.
Multi Mover User Manual 12 2007-01-03/16:45