User manual

Mounting

ORIENTATION

This fixture must be mounted horizontally. The base may be set on a flat surface or suspended.

However, the base must always be parallel to the floor.

Floor

RIGGING

Hanging Clamp

It is important never to obstruct the fan or vents pathway. Mount the

fixture using, a suitable “C” or “O” type clamp. Adjust the angle of

the fixture by loosening both knobs and tilting the fixture. After

finding the desired position, retighten both knobs.

• When selecting installation location, take into consideration lamp

replacement access and routine maintenance.

• Safety cables should always be used.

Note!

Clamp is sold separatel

• Never mount in places where the fixture will be exposed to rain, high

humidity, extreme temperature changes or restricted ventilation.

• Always use heavy duty hanging clamps with this fixture.

4. OPERATING INSTRUCTIONS

Navigating the Control Panel

Access control panel functions using the four panel buttons located directly underneath the LCD

Display. NOTE: The display will turn off after 30 seconds if no buttons are pushed.

MODE

/ESC

Button Function

DOWN

ENTER

CONTROL PANEL

Used to access the menu or to scroll

through top-level menu items.

<UP>

Scrolls through menu options in ascending

order

<DOWN>

Scrolls through menu options in descending

order

<ENTER>

Used to select and store the current menu

or option w

ithin a menu

DMX Signal Indicator

Multi Mover User Manual 10 2007-01-03/16:45