User manual

LG-3355 User Manual 6 11/18/2005/15:24

Rear Panel Control Details

1) On/Off switch: Turn on/off the unit.

2) Power cord: This connection supplies main power to the fixture. Be sure the main power

matches the required power of your fixture.

3) Fuse holder: This housing stores the protective fuse. Always replace with the extra same type

fuse. Replacement with anything other than the specified part may damage your unit.

4) Red LED: Power indicator

5) Blue LED: Sound indicator.

6) Master/Slave Mode: Select the master/slaver mode.

7) Signal input/output: uses a _3.5mm stereo microphone cable to link the unit together for

master/slave link.

8) Infrared Receiver: Indicates the location of the infrared receiver for use with the wireless remote

controller.

Wireless Controller

This unit comes with a wireless remote controller.

1) Laser ON/OFF: Turn on/off the laser beam.

2) Color: Change the color of effect. Multicolor projectors only

3) Monchr: Go to single laser beam. Multicolor projectors only

4) Sound active: 10 programs. Press Sound Active button, 10

programs run to sound. 9 of the 10 programs are selectable by

pressing corresponding button.

5) Auto: 10 programs. Press Sound Active button, 10 programs

run automatically. 9 of the 10 programs are selectable by pressing corresponding button.

Power On/O

Signal Out

Signal In

Infrared Receiver

Sound

Sensitivity

Power Cord Fuse

Master/Slave