User manual

11. X PRESS ™ 512-P LUS S TANDALONE T RIGGERING 57 Chauvet® ShowXpress™ V6.22
IR (Wireless) Triggering
This interface supports IR triggering. Please see the guidelines on wireless triggering below.
The LED indicator on the front of the interface will light to indicate “IR data”.
The IR sensor is located on the front of the interface; however, the IR sensor may be relocated by
using the IR Ext. port on the back of the interface.
The unit will only play back scenes AFTER they have been successfully uploaded into the interface
with the Upload screen.
Proprietary CHAUVET® Remote
The Xpress™ 512-Plus interface features wireless triggering of up to 18 scenes in standalone
operation. These are accessed using the CHAUVET® proprietary remote shown below.
The model number for a replacement battery is CR2025 (standard) or CR2032 (high capacity).
Operation
Please see the following notes on operation.
The “Normal Speed” button disables playback speed modification.
Playback Speed Modification affects ALL
of the programs proportionally. It is NOT possible to
modify individual programs.
Generic Remote
An alternative to using the CHAUVET® proprietary remote shown above, the interface will respond to
a standard Philips® universal remote code. This will work with up to 10 scenes.
Please see the buttons below that the interface will respond to.
Button 1: Scene 1
Button 2: Scene 2
Button 3: Scene 3
Button 4: Scene 4
Button 5: Scene 5
Button 6: Scene 6
Button 7: Scene 7
Button 8: Scene 8
Button 9: Scene 9
Button 0: Scene 10
Button CH+: Increase Run Speed
Button CH-: Decrease Run Speed
Scene Triggers
Decrease speed
Battery Cover
Increase Speed
Normal Speed