User manual
Table Of Contents
- 1. Before You Begin
- 2. Introduction
- 3. Interfaces
- 4. Setting up the Hardware/Software
- Minimum Hardware Requirements (without 3D visualization)
- Minimum Hardware Requirements (with 3d visualization)
- Software Installation (Windows® XP, Vista & 7)
- Hardware Driver Installation (Windows® Vista & 7)
- Driver Installation (Windows® XP)
- Driver Installation (Mac OSX)
- Driver Reinstallation (Windows® Vista & 7)
- Driver Reinstallation (Windows® XP)
- Interface Troubleshooting
- 5. Overview
- 6. Programming
- 7. Playback
- Importing Scenes into the Live-Buttons Screen
- Scene Playback Modifications
- Live-Buttons Page Playback Modifications
- Live-Button screen Playback
- 3D View
- Live-Timeline Screen
- 8. Upload Screen
- 9. Backup/Restore
- 10. Keyboard Shortcuts
- 11. Xpress™ 512-Plus Standalone Triggering
- 12. Updating the Interface Firmware
- 13. Appendix
- 14. Technical Specifications
7. Playback 46 Chauvet® ShowXpress™ V6.22
Live-Timeline Screen
Triggering a Timeline through the Live Screen
This feature allows the ability to save multiple timelines and trigger them through buttons in
the Live Screen.
1. Using the mouse, right-click the Board Selection Bar in the Live Screen to
bring up the sub-menu.
2. Select “Add timeline” with the left mouse button.
3. A sub-window will appear. Use this window to select the appropriate
timeline.
4. Select “Open”.
The right-click sub-menu options for Timeline buttons are limited in the Live Screen.
Timeline buttons in the Live Screen will appear with a unique background, as displayed below.
Timeline Title location
Back
g
round