User manual
Table Of Contents
- 1. Before You Begin
- 2. Introduction
- 3. Interfaces
- 4. Setting up the Hardware/Software
- Minimum Hardware Requirements (without 3D visualization)
- Minimum Hardware Requirements (with 3d visualization)
- Software Installation (Windows® XP, Vista & 7)
- Hardware Driver Installation (Windows® Vista & 7)
- Driver Installation (Windows® XP)
- Driver Installation (Mac OSX)
- Driver Reinstallation (Windows® Vista & 7)
- Driver Reinstallation (Windows® XP)
- Interface Troubleshooting
- 5. Overview
- 6. Programming
- 7. Playback
- Importing Scenes into the Live-Buttons Screen
- Scene Playback Modifications
- Live-Buttons Page Playback Modifications
- Live-Button screen Playback
- 3D View
- Live-Timeline Screen
- 8. Upload Screen
- 9. Backup/Restore
- 10. Keyboard Shortcuts
- 11. Xpress™ 512-Plus Standalone Triggering
- 12. Updating the Interface Firmware
- 13. Appendix
- 14. Technical Specifications
7. Playback 38 Chauvet® ShowXpress™ V6.22
Live-Button screen Playback
Play/Pause
This feature increases the functionality of the Live-Buttons screen by adding the following
possibilities: seamless playback, and multiple scene triggering simultaneously.
When using this function on a scene that is currently running, it will turn it off. When using this
function on a scene that is not currently running, it will turn it on.
This function is a 2-step process. The first step prepares the execution, and the second step
completes the execution. Please follow the steps below for this procedure.
1. Press <Play/Pause>. See fig.
Pp.a.
2. Select a scene. The symbol will
appear on the scene button. This
is the preparation. See fig. Pp.b.
3. Press <Play/Pause> a second
time. This is the execution.
This function may be used on an
unlimited quantity of scenes
Preparation
Prepared
button
Play/Pause
Play/Pause
button
fig. Pp.a
fig. Pp.b