User manual
Table Of Contents
- 1. Before You Begin
- 2. Introduction
- 3. Interfaces
- 4. Setting up the Hardware/Software
- Minimum Hardware Requirements (without 3D visualization)
- Minimum Hardware Requirements (with 3d visualization)
- Software Installation (Windows® XP, Vista & 7)
- Hardware Driver Installation (Windows® Vista & 7)
- Driver Installation (Windows® XP)
- Driver Installation (Mac OSX)
- Driver Reinstallation (Windows® Vista & 7)
- Driver Reinstallation (Windows® XP)
- Interface Troubleshooting
- 5. Overview
- 6. Programming
- 7. Playback
- Importing Scenes into the Live-Buttons Screen
- Scene Playback Modifications
- Live-Buttons Page Playback Modifications
- Live-Button screen Playback
- 3D View
- Live-Timeline Screen
- 8. Upload Screen
- 9. Backup/Restore
- 10. Keyboard Shortcuts
- 11. Xpress™ 512-Plus Standalone Triggering
- 12. Updating the Interface Firmware
- 13. Appendix
- 14. Technical Specifications
4. Setup 14 Chauvet® ShowXpress™ V6.22
3. When Windows® XP asks if it can “connect to Windows® Update to search for software”
select “No, not this time”
4. Click <NEXT> to continue.
5. On the next screen, select the bubble that reads “Install the software automatically
(recommended)”
6. When the following window appears prompting that the driver did not pass the Windows® Logo
testing compatibility, simply click <CONTINUE ANYWAY> to continue the installation.
7. When it’s complete, click <FINISH> and the window will disappear and a popup window will
indicate that the driver installation was successful.